Production Introduction
LEIK series multifunction CCTV surge protection devices are designed by following IEC lightning protection request and CCTV HD IPC, suitable for alternating current /direct current, power supply , own RJ45 port network camera surge protection device to reduce protection cost and installation difficulty . It takes advantage of equipotential protection principle and adopts 10kA maximum capacity to protect CCTV monitoring devices
Product Feature
a.10kA. Discharge current : 10kA
b. Two in one design
c. Low loss
d. Fast response
e. Power lightning protection failure LED indicate
Model | Type | LK-RJ45/1KM-POE / LK-RJ45/1KM-POE-8/16CH | ||
Signal(10/700μs) | Power(8/20μs) | |||
Rated operational voltage | Wire/ Wire | Un | 5V | 48V |
Wire/Ground | 48V | |||
Maximum sustainable operating voltage | Wire/ Wire Wire/Ground | Uc | 6V | 58V |
58V | ||||
Rated discharge current | In | 350A | 3KA | |
Maximum sustainable operating voltage | 2.5KV | 6KV | ||
Voltage protection level | Up | ≤50V | ≤650V | |
Transmission rate(3dB) | fg | > 1000MHz | ||
Interface type | RJ45 | |||
Protection number line | 1,2,3,4,5,6,7,8 | |||
Casing material | Aluminium alloy | |||
Insertion loss | lL | ≤0.2dB |
Order
LK-SPD-KPT2/1(AC220V)
LK-SPD-KPT2/1(6-24V/AC/DC)